This machine structure pattern four roller type, have roller final drive, through moderate output gear wheel of plane and have roller gear wheel clench the teeth, make panel for one and offer the torsion; Make the roller and make vertical sports of hoisting or lower, the hydraulic oil in the hydraulic pressure jar acts on the piston and gets , in order to clamp the panel, it is the hydraulic transmission; On the bottom there are side rollers and do sports of inclining along the framework guide on both sides of the roller, pass the mother’s worm gear worm transmission of pole silk of silk; This machine advantage is that a panel tip is curved in advance and a round can go on on the same equipment .

Specification type	The largest thickness mm of a board	The largest width mm of a board	A board surrenders limit Mpa	Speed m/min of a board	Fully loaded with the minimum diameter mm	Have the diameter mm of the roller	Make the diameter mm of the roller	Diameter mm of the side roller	The biggest journey mm of the side roller	Side roller changes speed m/min	Power kw of the main electrical machinery
W12-25*2000	25	2000	245	4	800	350	320	240	240	80	22
W12-20*2500	20	2500	245	4	640	350	320	240	240	80	30
W12-30*2000	30	2000	245	4	1000	400	360	240	240	80	37
W12-25*2500	25	2500	245	4	800	400	360	240	240	80	37
W12-35*2000	35	2000	245	4	1200	420	380	210	210	80	37
W12-30*2500	30	2500	245	4	1000	400	360	230	230	80	37
W12-40*2000	40	2000	245	4	1400	480	400	420	420	80	45
W12-45*2000	45	2000	245	4	1600	500	450	280	280	80	45
W12-35*2500	35	2500	245	4	1200	480	400	420	420	80	45
W12-40*2500	40	2500	245	4	1400	500	450	380	380	80	45
W12-45*2500	45	2500	245	4	1600	530	480	450	450	80	63
W12-35*3000	35	3000	245	4	1200	500	450	380	380	80	45
W12-45*3000	45	3000	245	4	1600	560	500	450	450	80	63
W12-55*2500	55	2500	245	4	2000	600	550	500	500	78	75
W12-55*3000	55	3000	245	4	2000	620	560	500	500	78	75
W12-65*3000	65	3000	245	4	2400	670	600	550	550	78	110